Complete MEP Mechanical Engineering & BIM Coordination Services
Introduction
AMC Engineer provides comprehensive mechanical, electrical, and plumbing (MEP) design services using Revit MEP, delivering fully coordinated LOD 300-400 models that reduce field conflicts by 85% and optimize HVAC system efficiency by 25% for hospitals, malls, and high-rise buildings.
What We Offer
- HVAC System Design
VAV, chilled water, DX systems with load calculations, equipment selection, and energy modeling
- Ductwork & Piping Design
Routing optimization, sizing calculations, and fabrication drawings with pressure loss analysis.
- Plumbing & Fire Protection
Domestic water, sanitary, storm water systems with fixture units and hydraulic calculations.
- BIM MEP Coordination
Navisworks clash detection and resolution between MEP/Structure/Architecture disciplines.
- CFD Analysis & Simulation
Airflow, thermal comfort, and smoke evacuation simulations for critical environments.
- Commissioning & Energy Audits
MEP system commissioning support and LEED energy modeling for green certifications.
Steps Of Work
1.Load Calculations & Sizing
Perform ASHRAE heat load, ventilation, and plumbing fixture calculations.
2.Conceptual Routing
Develop preliminary MEP routing with ceiling space allocation and shaft planning.
3.Detailed Design & Modeling
Create LOD 300 Revit MEP models with equipment, ductwork, and piping systems.
4.Clash Detection & Coordination
Run Navisworks tests, resolve conflicts, and issue coordinated model for approval.
5.Construction Documentation
Generate shop drawings, schedules, and specifications compliant with SMACNA/ASHRAE.
6.BIM Handover & As-Builts
Deliver COBie data, O&M manuals, and record models for facility management.et clita kasd gubergren, no sea takimata sanctus est.