Complete Civil Infrastructure & BIM Design Services for Roads, Utilities & Bridges
Introduction
AMC Engineer provides comprehensive infrastructure engineering using Civil 3D and InfraWorks, delivering BIM-coordinated designs for roads, utilities, bridges, and stormwater systems that reduce construction conflicts by 75% and optimize earthwork by 30% for highways, municipalities, and master-planned communities.
What We Offer
- Highway & Roadway Design
Horizontal/vertical alignment, cross-sections, interchanges, and pavement design per AASHTO.
- Utility Network Design
Water, wastewater, stormwater, and electrical duct banks with hydraulic modeling.
- Bridge & Structure Design
Precast/post-tensioned bridges, culverts, and pedestrian overpasses.
- Earthworks & Grading Design
Cut/fill optimization, mass haul diagrams, and erosion control planning.
- Stormwater Management
Detention ponds, swales, and permeable paving with HEC-RAS/InfoSWMM analysis.
- GIS & Asset Management
Digital twin creation and GIS integration for infrastructure lifecycle management.
Steps Of Work
1.Topographic Survey Integration
Import drone/laser scan data into Civil 3D and establish project coordinate system.
2.Conceptual Alignment Design
Develop preliminary horizontal/vertical alignments with corridor modeling.
3.Detailed Network Design
Pipe networks, intersections, drainage systems, and utility coordination.
4.BIM & Clash Coordination
Navisworks coordination between civil, structural, and underground services.
5.Quantity & Cost Estimation
Earthwork volumes, material takeoffs, and 5D BIM cost modeling.
6.Construction Documentation
Complete plan/profile sheets, cross-sections, and tender packages.