Complete Electrical Engineering & BIM Power Systems Design Services
Introduction
AMC Engineer delivers fully coordinated electrical BIM services using Revit MEP, providing LOD 300-400 models for power distribution, lighting, and low-voltage systems that reduce cable routing conflicts by 90% and optimize energy efficiency by 22% for commercial, industrial, and healthcare facilities.
What We Offer
- Medium/High Voltage Design
Substation design, transformer sizing, MV cable routing, and protection coordination studies.
- Power Distribution Systems
Panel schedules, feeder sizing, load calculations, and short circuit analysis per NEC/IEC.
- Lighting Design & Controls
Daylight harvesting, DALI/DMX controls, and photometric analysis with Dialux/Relux.
- Low Voltage Systems
Fire alarm, CCTV, access control, data networks, and PA systems design.
- Electrical BIM Coordination
Navisworks clash detection for cable trays, conduits, and equipment placement.
- Renewable Energy Integration
Solar PV design, EV charging stations, and microgrid integration with battery storage.
Steps Of Work
1.Load Analysis & Calculations
Perform demand load calculations, diversity factors, and voltage drop analysis.
2.Single Line Diagram Development
Create SLDs with equipment ratings, cable sizing, and protection device coordination.
3.3D BIM Modeling
Model cable trays, conduits, lighting fixtures, and panels in Revit MEP LOD 300.
4.MEP Coordination
Clash detection and resolution with HVAC/plumbing/structure disciplines.
5.Detailed Design Documentation
Panel schedules, riser diagrams, cable schedules, and control schematics.
6.Commissioning Support
Testing protocols, O&M manuals, and as-built model handover. est.