AMC Engineer provides comprehensive engineering calculations across structural, MEP, civil, and geotechnical disciplines using ETABS, Revit, and Mathcad, delivering code-compliant analysis reports that accelerate permitting by 50% and ensure zero calculation errors for high-rise buildings, infrastructure, and industrial projects.​

1. • Structural Load & Design Calculations

   Dead/live/wind/seismic loads, member sizing, deflection checks per ACI/AISC/ASCE 7.

2. • MEP Load Calculations

   HVAC heat loads (ASHRAE CLTD/RTF), electrical demand/diversity, plumbing fixture units.

3. • Foundation & Geotechnical Analysis

   Bearing capacity, settlement, pile design, retaining wall stability per AASHTO/IBC.

4. • Stormwater & Hydraulic Calculations

   Rational method, TR-55, HEC-HMS runoff analysis, culvert/pipe sizing.

5. • Energy & Thermal Analysis

   Building energy modeling, U-value calculations, psychrometric analysis.

6. • Fire & Life Safety Calculations

   Egress analysis, smoke control, sprinkler hydraulic calculations per NFPA.

1. Input Data Collection
   Gather architectural plans, material specs, site data, and code requirements.
2. Preliminary Sizing & Assumptions
   Perform hand calculations for initial member/equipment sizing.
3. Advanced Analysis
   Run ETABS/SAFE/HEC-RAS models with automated load combinations.
4. Code Compliance Verification
   Check against IBC, ASCE 7, ASHRAE 90.1, and local amendments.
5. Report Generation
   Create stamped PDF reports with calculations, sketches, and summary tables.
6. Peer Review & Revisions
   Third-party verification and client feedback incorporation.